dmesg - MSI AMD Radeon HD 5000
microcode: CPU0 microcode updated early to revision 0x7, date = 2013-08-20
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-81-generic (buildd@lgw01-02) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #104-Ubuntu SMP Wed Jun 14 08:17:06 UTC 2017 (Ubuntu 4.4.0-81.104-generic 4.4.67)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bd77ffff] usable
BIOS-e820: [mem 0x00000000bd780000-0x00000000bd78dfff] ACPI data
BIOS-e820: [mem 0x00000000bd78e000-0x00000000bd7cffff] ACPI NVS
BIOS-e820: [mem 0x00000000bd7d0000-0x00000000bd7dffff] reserved
BIOS-e820: [mem 0x00000000bd7ed000-0x00000000bdffffff] reserved
BIOS-e820: [mem 0x00000000fed20000-0x00000000fed3ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./H55MX-S Series, BIOS 080015 03/28/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-E3FFF write-protect
E4000-E7FFF write-through
E8000-EBFFF write-protect
EC000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FC0000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 base 0BE000000 mask FFE000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 1GB, type WB
reg 2, base: 3GB, range: 1GB, type UC
reg 3, base: 3040MB, range: 32MB, type UC
total RAM covered: 8160M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3040MB, range: 32MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 1GB, type WB
e820: update [mem 0xbe000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbd780 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
BRK [0x0220b000, 0x0220bfff] PGTABLE
BRK [0x0220c000, 0x0220cfff] PGTABLE
BRK [0x0220d000, 0x0220dfff] PGTABLE
BRK [0x0220e000, 0x0220efff] PGTABLE
BRK [0x0220f000, 0x0220ffff] PGTABLE
BRK [0x02210000, 0x02210fff] PGTABLE
RAMDISK: [mem 0x33a64000-0x35d29fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F9880 000014 (v00 ACPIAM)
ACPI: RSDT 0x00000000BD780000 000044 (v01 032811 RSDT1315 20110328 MSFT 00000097)
ACPI: FACP 0x00000000BD780200 000084 (v01 032811 FACP1315 20110328 MSFT 00000097)
ACPI: DSDT 0x00000000BD780460 006FE7 (v01 996F1 996F1P06 00000000 INTL 20051117)
ACPI: FACS 0x00000000BD78E000 000040
ACPI: APIC 0x00000000BD780390 00008C (v01 032811 APIC1315 20110328 MSFT 00000097)
ACPI: MCFG 0x00000000BD780420 00003C (v01 032811 OEMMCFG 20110328 MSFT 00000097)
ACPI: OEMB 0x00000000BD78E040 000082 (v01 032811 OEMB1315 20110328 MSFT 00000097)
ACPI: HPET 0x00000000BD78A460 000038 (v01 032811 OEMHPET 20110328 MSFT 00000097)
ACPI: ASF! 0x00000000BD78A4A0 000099 (v32 LEGEND I865PASF 00000001 INTL 20051117)
ACPI: DMAR 0x00000000BD78E0D0 000090 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
ACPI: SSDT 0x00000000BD78F580 000363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
NODE_DATA(0) allocated [mem 0x23fff6000-0x23fffafff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000023fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000bd77ffff]
node 0: [mem 0x0000000100000000-0x000000023fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff]
On node 0 totalpages: 2086685
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 12062 pages used for memmap
DMA32 zone: 771968 pages, LIFO batch:31
Normal zone: 20480 pages used for memmap
Normal zone: 1310720 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbd780000-0xbd78dfff]
PM: Registered nosave memory: [mem 0xbd78e000-0xbd7cffff]
PM: Registered nosave memory: [mem 0xbd7d0000-0xbd7dffff]
PM: Registered nosave memory: [mem 0xbd7e0000-0xbd7ecfff]
PM: Registered nosave memory: [mem 0xbd7ed000-0xbdffffff]
PM: Registered nosave memory: [mem 0xbe000000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
e820: [mem 0xbe000000-0xfed1ffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88023fc00000 s98264 r8192 d28712 u262144
pcpu-alloc: s98264 r8192 d28712 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2054058
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8094080K/8346740K available (8469K kernel code, 1294K rwdata, 3984K rodata, 1484K init, 1316K bss, 252660K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:488 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2526.935 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.87 BogoMIPS (lpj=10107740)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff820b8000 - ffffffff820c0000)
ftrace: allocating 32129 entries in 126 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 2
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f020e2
DMAR: RMRR base: 0x000000000ed000 end: 0x000000000effff
DMAR: RMRR base: 0x000000bd7ed000 end: 0x000000bd7fffff
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU X3440 @ 2.53GHz (family: 0x6, model: 0x1e, stepping: 0x5)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
core: CPU erratum AAJ80 worked around
core: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
microcode: CPU1 microcode updated early to revision 0x7, date = 2013-08-20
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
microcode: CPU2 microcode updated early to revision 0x7, date = 2013-08-20
#3
microcode: CPU3 microcode updated early to revision 0x7, date = 2013-08-20
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (20215.48 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbd78e000-0xbd7cffff] (270336 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 7:10:11, date: 06/30/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880235DDA000 000F20 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880235D81800 0004F4 (v01 PmRef P001Cst 00003001 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xbe000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window]
pci_bus 0000:00: root bus resource [mem 0x400000000-0xfffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:d130] type 00 class 0x060000
pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfbdffc00-0xfbdffc0f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfbdfc000-0xfbdfc3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfbdf8000-0xfbdfbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfbdf6000-0xfbdf63ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3b06] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xcc00-0xcc07]
pci 0000:00:1f.2: reg 0x14: [io 0xc880-0xc883]
pci 0000:00:1f.2: reg 0x18: [io 0xc800-0xc807]
pci 0000:00:1f.2: reg 0x1c: [io 0xc480-0xc483]
pci 0000:00:1f.2: reg 0x20: [io 0xc400-0xc41f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfbdf4000-0xfbdf47ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbdff800-0xfbdff8ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xfbdfe000-0xfbdfefff 64bit]
pci 0000:01:00.0: [1002:68f9] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfbee0000-0xfbefffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xd000-0xd0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfbebc000-0xfbebffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xe800-0xe8ff]
pci 0000:03:00.0: reg 0x18: [mem 0xfafff000-0xfaffffff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xfaff8000-0xfaffbfff 64bit pref]
pci 0000:03:00.0: reg 0x30: [mem 0xfbfe0000-0xfbffffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:1c.4: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xbe000000-0xdfffffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x400000000-0xfffffffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: Enabled 3 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI: Probing PCI hardware (bus ff)
ACPI: \: failed to evaluate _DSM (0x1001)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
pci 0000:ff:00.0: [8086:2c50] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000
pci 0000:ff:03.2: [8086:2c9a] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000
pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbd780000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 24 for MSI
hpet: hpet3 irq 25 for MSI
hpet: hpet4 irq 26 for MSI
hpet: hpet5 irq 27 for MSI
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x0800-0x087f] could not be reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:04: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xffc00000-0xffefffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0x0a10-0x0a1f] has been reserved
system 00:07: [io 0x0a10-0x0a1f] has been reserved
system 00:07: [io 0x0a20-0x0a2f] has been reserved
system 00:07: [io 0x0a30-0x0a3f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:09: [mem 0x00100000-0xbdffffff] could not be reserved
system 00:09: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xbe000000-0xbe1fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x400000000-0x4001fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xbe000000-0xbe1fffff]
pci 0000:00:1c.0: bridge window [mem 0x400000000-0x4001fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:1c.4: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xbe000000-0xdfffffff window]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window]
pci_bus 0000:00: resource 10 [mem 0x400000000-0xfffffffff window]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xbe000000-0xbe1fffff]
pci_bus 0000:02: resource 2 [mem 0x400000000-0x4001fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:03: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:04: resource 8 [mem 0xbe000000-0xdfffffff window]
pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfed8ffff window]
pci_bus 0000:04: resource 10 [mem 0x400000000-0xfffffffff window]
pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 35608K (ffff880033a64000 - ffff880035d2a000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb9780000-0xbd780000] (64MB) mapped at [ffff8800b9780000-ffff8800bd77ffff]
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1498806610.760:1): initialized
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
aer 0000:00:03.0:pcie02: service driver aer loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.0:pcie04: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90001000000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x1E
intel_idle: lapic_timer_reliable_states 0x2
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbdfc000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-81-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbdf6000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-81-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x7
microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x7
microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x7
microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x7
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 4e3fcaabc4148de0b198d1fb3d36a6c6d4cf062b'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 5:611:168
acpi device:31: hash matches
rtc_cmos 00:01: setting system clock to 2017-06-30 07:10:11 UTC (1498806611)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1484K (ffffffff81f45000 - ffffffff820b8000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1760K (ffff880001848000 - ffff880001a00000)
Freeing unused kernel memory: 112K (ffff880001de4000 - ffff880001e00000)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
intel ips 0000:00:1f.6: Non-IPS CPU detected.
intel ips 0000:00:1f.6: IPS not supported on this CPU
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xffffc9000000e000, 90:fb:a6:97:35:f3, XID 081000c0 IRQ 32
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[drm] Initialized drm 1.1.0 20060810
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
r8169 0000:03:00.0 enp3s0: renamed from eth0
[drm] radeon kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (d0000000 500000) vs hw (d0000000 10000000)
fb: switching to radeondrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1462:0x2181).
[drm] register mmio base: 0xFBEE0000
[drm] register mmio size: 131072
ATOM BIOS: Cedar
radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 4066538 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading CEDAR Microcode
[drm] Internal thermal controller with fan control
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfbdf4000 port 0xfbdf4100 irq 33
ata2: SATA max UDMA/133 abar m2048@0xfbdf4000 port 0xfbdf4180 irq 33
ata3: SATA max UDMA/133 abar m2048@0xfbdf4000 port 0xfbdf4200 irq 33
ata4: SATA max UDMA/133 abar m2048@0xfbdf4000 port 0xfbdf4280 irq 33
ata5: SATA max UDMA/133 abar m2048@0xfbdf4000 port 0xfbdf4300 irq 33
ata6: SATA max UDMA/133 abar m2048@0xfbdf4000 port 0xfbdf4380 irq 33
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x000000000025E000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8800350aec00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8800350aec0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000181c418
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 2 usecs
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata1: SATA link down (SStatus 0 SControl 300)
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
usb 1-1.1: new high-speed USB device number 3 using ehci-pci
ata2: SATA link down (SStatus 0 SControl 300)
usb 1-1.1: New USB device found, idVendor=1a40, idProduct=0101
usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1.1: Product: USB 2.0 Hub
hub 1-1.1:1.0: USB hub found
hub 1-1.1:1.0: 4 ports detected
usb 1-1.4: new high-speed USB device number 4 using ehci-pci
tsc: Refined TSC clocksource calibration: 2526.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x246cdab5d1d, max_idle_ns: 440795263955 ns
usb 1-1.4: New USB device found, idVendor=2537, idProduct=1068
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: NS1068
usb 1-1.4: Manufacturer: Norelsys
usb 1-1.4: SerialNumber: 0123456789ABCDE
usb-storage 1-1.4:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-1.4:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD2
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] DVI-I-1
[drm] HPD4
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] fb mappable at 0xD045F000
[drm] vram apper at 0xD0000000
[drm] size 5242880
[drm] fb depth is 24
[drm] pitch is 5120
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x64
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
usb 1-1.1.1: new low-speed USB device number 5 using ehci-pci
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD2500AAKX-603CA0, 18.01H18, max UDMA/100
ata3.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA WDC WD2500AAKX-6 1H18 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
usb 1-1.1.1: New USB device found, idVendor=093a, idProduct=2510
usb 1-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1.1: Product: USB Optical Mouse
usb 1-1.1.1: Manufacturer: PixArt
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/0003:093A:2510.0001/input/input5
hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1a.0-1.1.1/input0
usb 1-1.1.2: new low-speed USB device number 6 using ehci-pci
usb 1-1.1.2: New USB device found, idVendor=1c4f, idProduct=0002
usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1.2: Product: USB Keyboard
usb 1-1.1.2: Manufacturer: SIGMACHIP
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/0003:1C4F:0002.0002/input/input6
ata4: SATA link down (SStatus 0 SControl 300)
hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.1.2/input0
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.1/0003:1C4F:0002.0003/input/input7
hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.1.2/input1
ata5: SATA link down (SStatus 0 SControl 300)
clocksource: Switched to clocksource tsc
ata6: SATA link down (SStatus 0 SControl 300)
scsi 6:0:0:0: Direct-Access ATA WDC WD3200BPVT-2 1A01 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
floppy0: no floppy controllers found
work still pending
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Created slice System Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Started Read required files in advance.
systemd[1]: Mounting Debug File System...
systemd[1]: Started Braille Device Support.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting Set console keymap...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started Trigger resolvconf update for networkd DNS.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Journal Service.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
gpio_ich: GPIO from 436 to 511 on gpio_ich
systemd-journald[251]: Received request to flush runtime journal from PID 1
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input8
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1200: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
floppy0: no floppy controllers found
work still pending
audit: type=1400 audit(1498806627.853:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=621 comm="apparmor_parser"
audit: type=1400 audit(1498806627.957:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=617 comm="apparmor_parser"
audit: type=1400 audit(1498806627.957:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=617 comm="apparmor_parser"
audit: type=1400 audit(1498806627.961:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=629 comm="apparmor_parser"
audit: type=1400 audit(1498806627.977:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=618 comm="apparmor_parser"
audit: type=1400 audit(1498806627.977:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=618 comm="apparmor_parser"
audit: type=1400 audit(1498806627.977:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=618 comm="apparmor_parser"
audit: type=1400 audit(1498806627.977:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=618 comm="apparmor_parser"
audit: type=1400 audit(1498806628.013:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=630 comm="apparmor_parser"
audit: type=1400 audit(1498806628.013:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=630 comm="apparmor_parser"
Adding 7849980k swap on /dev/sda5. Priority:-1 extents:1 across:7849980k FS
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
r8169 0000:03:00.0 enp3s0: link down
r8169 0000:03:00.0 enp3s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
r8169 0000:03:00.0 enp3s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
usb 1-1.4: USB disconnect, device number 4
perf interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf interrupt took too long (5024 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
show_signal_msg: 33 callbacks suppressed
conftest[2125]: segfault at 0 ip 00000000004005b0 sp 00007ffef8696c20 error 4 in conftest[400000+1000]
conftest[2154]: segfault at 0 ip 00007f88c710e58a sp 00007ffd2d71f838 error 4 in libc-2.23.so[7f88c706f000+1c0000]
usb 1-1.1: USB disconnect, device number 3
usb 1-1.1.1: USB disconnect, device number 5
usb 1-1.1.2: USB disconnect, device number 6
usb 1-1.1: new high-speed USB device number 7 using ehci-pci
usb 1-1.1: New USB device found, idVendor=1a40, idProduct=0101
usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1.1: Product: USB 2.0 Hub
hub 1-1.1:1.0: USB hub found
hub 1-1.1:1.0: 4 ports detected
usb 1-1.1.1: new low-speed USB device number 8 using ehci-pci
usb 1-1.1.1: New USB device found, idVendor=093a, idProduct=2510
usb 1-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1.1: Product: USB Optical Mouse
usb 1-1.1.1: Manufacturer: PixArt
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/0003:093A:2510.0004/input/input18
hid-generic 0003:093A:2510.0004: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1a.0-1.1.1/input0
usb 1-1.1.2: new low-speed USB device number 9 using ehci-pci
usb 1-1.1.2: New USB device found, idVendor=1c4f, idProduct=0002
usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1.2: Product: USB Keyboard
usb 1-1.1.2: Manufacturer: SIGMACHIP
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/0003:1C4F:0002.0005/input/input19
hid-generic 0003:1C4F:0002.0005: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.1.2/input0
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.1/0003:1C4F:0002.0006/input/input20
hid-generic 0003:1C4F:0002.0006: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.1.2/input1
usb 1-1.1: clear tt 1 (0090) error -71
usb 1-1.1-port2: cannot reset (err = -71)
usb 1-1.1: clear tt 1 (0080) error -71
usb 1-1.1-port2: cannot reset (err = -71)
usb 1-1.1: USB disconnect, device number 7
usb 1-1.1.1: USB disconnect, device number 8
usb 1-1.1-port2: cannot reset (err = -71)
usb 1-1.1.2: USB disconnect, device number 9
usb 1-1.1: new high-speed USB device number 10 using ehci-pci
usb 1-1.1: New USB device found, idVendor=1a40, idProduct=0101
usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1.1: Product: USB 2.0 Hub
hub 1-1.1:1.0: USB hub found
hub 1-1.1:1.0: 4 ports detected
usb 1-1.1.1: new low-speed USB device number 11 using ehci-pci
usb 1-1.1.1: New USB device found, idVendor=093a, idProduct=2510
usb 1-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1.1: Product: USB Optical Mouse
usb 1-1.1.1: Manufacturer: PixArt
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/0003:093A:2510.0007/input/input21
hid-generic 0003:093A:2510.0007: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1a.0-1.1.1/input0
usb 1-1.1.2: new low-speed USB device number 12 using ehci-pci
usb 1-1.1.2: New USB device found, idVendor=1c4f, idProduct=0002
usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1.2: Product: USB Keyboard
usb 1-1.1.2: Manufacturer: SIGMACHIP
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/0003:1C4F:0002.0008/input/input22
hid-generic 0003:1C4F:0002.0008: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.1.2/input0
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.1/0003:1C4F:0002.0009/input/input23
hid-generic 0003:1C4F:0002.0009: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.1.2/input1